Does it work when you start a terminal window and do: python (Python starts in the terminal) >>>from datetime import datetime...
Then there was a problem with your image or SD card. Removing the m4last.fw should solve the problem of not able to stop the sketch. Next time...
Can you post a copy of the index.php file you are looking at and the output it is giving?
Be sure that you have moved the web config panel node.js site to another port (81, 8080 etc) or switch it off. It listens to port 80 so could be...
Does it do the same when attached to an HDMI monitor?
Marshmellow, Android 6, starts default in HDMI mode so first try that. You have to set LVDS screen through the settings menu. The instructions for...
It is not easy. This link covers it (not tried it myself):...
And try another HDMI cable first.
It could also be that your Udoobuntu SD image or card is broken. You need to remove the last compiled sketch from your SD card and than boot. Can...
Why? It is full on topic. The only problem is that you started it but no longer have this issue. probably you get all notifications but you can...
Instead of a drill you could use a small 5-12V DC (stepper) motor. Or ask Derrick Rose [MEDIA]
From the Udoo shop: But I believe that it is not possible to change the I2C address of the current Bricks (do not know about the new Bricks) so...
For the DHT use the DHT library for the Neo (should be in your Neo board package...
This code should work after you have set the I2C-2 to the M4 core...
Default the I2C-2 port for brick sensor is assigned to the A9 core so you can read it from Linux. With the device tree editor you can assign it to...
Separate names with a comma.
