There is a line #define RA8875_CS 53//Connect SS to 53 But there is no Pin 53 on the Neo. I suppose this has to be 10 And what does your Serial...
Serial.available is working but not fully monkey proof. But perhaps I have to test it more. Serial.availableForWrite I had never heard about so...
I have no idea but I think it is important that you tell us on what OS you are running (Android or Udoobuntu 2).
I think via Listen settings in the http.conf file of the web server. All interfaces: Listen 80 Specific IP only: Listen 192.168.7.0:80
You can switch off the Neo web page: http://www.udoo.org/docs-neo/Cookbook_Linux/Change_Web_Control_Panel_port.html
Good question, wondered about it myself too. Also about the excluding Vat prices.
Probably OK to power the board (waiting for power input specs). Not OK to power the servo's.
Checked! Thank you.
Or you don't want to have anyone that has access to the webpage of the Neo to upload sketches?
I don't understand your question completely but I suspect you want to upload sketches through the wifi connection. If you install the packages...
Servo's normally run on 5-6V so you need another battery pack for the servo's. Or put 2 6V packs in serial for the Udoo and use 1 of the 2 to...
I think they are not ready yet. The Udoo Quad, Dual and Neo need a power supply between 6 and 15 Volt so very tolerant. I expect the Udoo X86...
For 20 servo's you could also use something like this http://www.lamja.com/?p=504 In this sulution the servos are separately powered. An I2C...
A little bit offtopic but why connect an extra arduino when the udoo has an arduino build in? Do you have to use 2 arduino's? If you need extra io...
Found a nice project that I would like to share with you: https://community.nxp.com/docs/DOC-331330 [IMG]
[IMG] https://www.crowdsupply.com/shapes-maker/udoo-case
Only 6 votes now....... :-(
Anyone? @Andrea Rovai ?
Just tested this again. The root cause for the kernel panic is the Serial.write(i); line when i=0. Also Serial.write((int)i); did not solve the...
I tried a sketch lately that uses Serial.write() but no problems found there. Did not use an analogwrite though. Only read a sensor and pushed the...
Separate names with a comma.
