I don't think so if it could be possible. But where do you need the data? In your original question you need the data on linux as fast as...
Looks like udoo team already changed some docs. Updated start topic.
And if you need these sensors only in the arduino part to steer Arduino I/O there is also no issue.
The problem seems to be the Arduino part and the serial between Linux and Arduino side. Standard the sensors are attached to the Linux side and...
I see the documentation on the Neo is updated now (Arduino differences) but no clue yet how to solve the interrupt instability.
On what OS are you trying to do this now?
I am sorry, I have no experience with Android. For someone else to be able to help did you follow the instructions here?...
Du you program your Udoo from the internal Arduino IDE or an external on your PC? Perhaps try this solution (also when programming internally):...
Good news! Do we have to do something to update our Neo's or is it just installing Arduino IDE 1.6.9 and the Udoo board package on our normal...
If you don't need to use the Arduino part you can switch it off and use also UART2 in Linux http://www.udoo.org/forum/index.php?posts/18326
I don't want to be rude but is this an issue with the Arduino compatibility or a brick issue in general? Do you have an running thread about this...
On which Udoo? Neo/Quad/Dual?
Which WiFi do you want to work with? The WiFi on the Neo or a wifi shield? The code is for a wifi shield. What do you want to do with WiFi? The...
Did you succeed in reading values from the Temperature sensor and the AirQuality sensor from the Arduino Serial monitor on the Udoo? Once you get...
This topic is a summary of the known issues with the Arduino part of the Neo on a Udoo released OS. The Neo Arduino processor is different than...
It does not matter in usage in the python program. Only the libraries behaves different. See this thread...
Agree, only for the voltage pin layout you have to blame Arduino because the Neo follows the Arduino Uno pin layout. And that is nice when you...
So if I read this correctly echo erase > /dev/udoo_ard should erase/reset the SAM3X? I did not try it yet...... or use bossac --reset ???
You have to use a digital pin (pin 2-13) not an analog one like in your example (A0). This type of sensor does not give a voltage to indicate a...
I did just test it with Udoobuntu 2 RC2 and it works for me. 2 remarks: 1. To read the value you really have to put 0 (GND) or 3.3V on it. If the...
Separate names with a comma.
