For B-key, if USB is not used, these two pins (7 and 9) are left open (nothing connected) and the M.2 card should ignore.
The PCB already provided the common ground. The USB issue may be related to NGFF key-B definition/handshakes. May need to look into it further.
Arduino 101's USB port in UDOO x86's implementation is internally (exist only in PCB traces) connected to Intel Braswell's USB port #3 and not...
re: free RDP-clone client or server Probably not (I am not talking about frame buffer map mirroring but true RDP) simply due to capitalism.
You can solder a pair of jumper wires from an existing USB2.0 port's D+ and D- lines to the corresponding M.2 socket B connector. Need to have a...
CN24 pin 3 and 4 are I2C signals and such I2C interface is from Arduino 101.
Minimally, you'll need a USB-1.8V LV TTL dongle. Most of the commercial USB serial dongles are 3.3V or 5V type. You don't want to feed 3.3V to...
See UDOO x86 manual page 35: Socket #4, CN 15 for Braswell (UART 1) Pin 6 Tx, Pin 8 Rx, <-- this one is the first COM port (UART 2) Pin 14 Tx,...
In what exec environment you are calling BIOS (e.g., post-boot assembler)? That exec env's support on BIOS (or UEFI and CSM under it) <--...
In addition to kernel patching/software fixes all on 3 of SA-00088 (Spectre #1, Spectre #2, and Meltdown) vulnerabilities, Spectre variant 2 also...
That video's device is a $110 device: UC100, which can be viewed as a "CNC Controller Adjunct". Mach3/Mach4 thru plug-in will talk to UC100 in...
I would also suggest group all those sensors to the Arduino side. If Arduino 101 is not resourceful/powerful, use something else such as Mega2560...
https://www.udoo.org/forum/threads/m-2-key-b-to-pci-express-adapter.6840/ BTW, no way to get 2 extra PCIe lanes, nor getting 4 lanes in bonded...
Okay, now it's clearer. You are talking about the internal physically USB to USB connection. On x86 side, it's USB host and the Arduino 101...
Did you put a level shifter in between to handle Braswell's 1.8V and Arduino's 3.3V I/O?
No. Bottom slot is a type-E slot, mainly for WiFi. Your current mSATA is on top-slot, the type-B slot. Dual-Ethernet module is also a type-B...
One thing I learned on the (mini-PC) power supply area, unrelated to UDOO products, is not all power supplies are created equal. I know this for a...
Where did you get the UDOO X86 board? Are you using the official power supply from UDOO?
Logitech B525 is a UVC webcam. Many Linux distributions have UVC built-into the kernel driver as UVC is the most basic type, Not sure your...
Read the fine manual. J8 is used for the PC on/off power control. Of course you have to configure the PC side to be soft/gracefully shutdown. It...
Separate names with a comma.
