UDOO x86 Project Update #36 should provide a hint...
In my own case, I prefer UDOO x86 Advanced Plus for several reasons: - N3160 is powerful enough and I got a good deal as in "early" tier (though...
Logitech K410 wireless keyboard. from a PC point of view, is a HID USB keyboard thus it should work.
My method to get a general idea of a CPU performance is to use Geekbench 3 score N3160 1-core multi-core 900 3000 N4200 (as used in UP...
The reason I started this thread is trying to get ideas from the people who had already "entered the amusement park", already enjoyed the rides,...
Recite what I had said in another sub-forum For the impatient few, may I suggest tone down your volume. It's a forum karma thing to keep everyone...
Key info other than marketing terms such as Burst freq and ATOM/Celeron/Pentium etc. is: TDP and SDP. In the case of N3160, TDP is just 6W and...
For the impatient few, may I suggest tone down your volume. It's a forum karma thing to keep everyone happy. The situation IMHO is similar with a...
Kickstarter campaign started April 13, 2016. View the price delta as the "be patient" made-up fee.
@diglo Stutter is a tell-tale sign of thermal throttling. (Here I am assuming your UDOO x86 is the Advanced version using N3160 SoC.) You can...
Adam, You'll next xHCI driver. BTW in your view, what would constitute the baremetal? Minimum bootloader (e.g., coreboot, libreboot), strip-down...
My mega thread https://www.udoo.org/forum/threads/my-mega-thread-on-regular-sized-pcie-slot.7045/
?riser cable <-- don't know what is it Do the same thing as if you would have used an ITX motherboard with only one PCIe x2 slot available. Has...
NGFF boards use MHF4 connector for RF connections. This type is tiny, fragile, and needs to be carefully inserted (straight lined up, aligned then...
Search PEX40057
See this picture https://www.udoo.org/forum/attachments/marvell_side1-jpg.700/ I use a Molex connector to bring out top-row of the 2x3 pin CN16...
@Laura The issue is not just Arduino itself got the reset, but more seriously its power got cut off (see post #4 and #8.on Curie_PWR_EN.) Waiting...
Since running the lspci command did not show the Realtek RT8111 Ethernet Controller device, your board has a hardware problem.
Of course, if you need a bad a$$ graphics card, you can try it as well (though only 1 or 2 PCIe lanes will be used) See this thread:...
Some might ask why another Ethernet card? Reason one: VMware vSphere does not support Realtek RT8111 chip. There are ways to work around it...
Separate names with a comma.
