Buy TXS0108e based modules (from eBay) A side: 1.8V, B side: 3.3V.
https://www.udoo.org/forum/threads/supplying-power-to-3-5-inch-hdd.6992/
Not compatible with NGFF G-key cards.
These "3.5" Arduino shield display" modules either use the parallel I/O (connects to several of Arduino's digital I/O ports) or I2C I/O. They...
GPIO =/= LVDS
Thierry, That IR receiver device is a "consumer IR" device, not a serial port device. That C-IR receiver is being front-end processed by STM32...
BTW, UDOO x86 is a full-fledged PC and can handle modern webcam. It does not make sense to use an intentionally crippled imaging device designed...
In serial transfer mode, it is moving the captured image (stored in camera module's frame buffer) one frame at a time in JPEG compressed format....
Arduino 101 is native 3.3V operation. Output pins follow that rule. 0V for low and close to 3.3V for logical high. 5V tolerant is for I/O pin used...
Samsung 850 EVO M.2 (size 2280) is a B+M-key mSATA flavor M.2 SSD so it should work, if the top M.2 slot (which is B-key) is used. Flex adapter...
FAN 12V DC control's MOSFET ( IRLML5203TRPBF ) per datasheet can handle up to 3A. Naturally it is subject to PCB trace thickness and heat...
There are two PWM channels in Braswell SoC chip. Both of them are under the 1.8V I/O system. I think at least one is used to control the CPU fan...
I2C leads are under 1.8V IO spec. Tolerance is +-5%. The main reason you have not cooked the chip is I2C uses a pair of pull up resistors to...
I2C1 is part of Braswell's I/O. As waltervl stated, Braswell (the Intel x86) is 1.8V system. They are intended for engineers who understand these....
Astro Pi flight case's design and qualification https://www.raspberrypi.org/blog/astro-pi-flight-case/ Guess the makers movement and student...
Rumor or what? Do you know for space expedition application, rad-hard is (or at least, used to be) a requirement???
They should work independently without interfering with each other. WiFi+BT M.2 card is a "key A+E" card which sits on the lower slot, while dual...
Suggest you open a ticket asking UDOO BIOS firmware designer to tell you the proper configuration. From Internet search, the issue seems to be...
Yes. Their ground levels are the same.
Definitely turn on SPDIF output in BIOS. Reinstall Realtek HD Audio driver. This time, it should also install "Digital Audio" portion of the...
Separate names with a comma.
