Hi, this library is quite mature. The Library works good writing and reading json messages through the serial port to and from the Arduino side...
Hi mushketer888, at boot all the external pins of the iMX6 processor (Linux/Android side) are set in input by the kernel. If you need to set the...
Hi Enric, I managed to find the source of the vlc for android modified to integrate the two joystick views in the video player and the default...
Hi SvartaHajen, i made the Carmadillo mk2 project, truly what i did was integrate the two joystick view in the Android vlc source (exactly in the...
These are the major changes in the new release 1.1 you can implement by your own From the release note: - Arduino IDE upgraded to v1.5.8...
Hi alfwro13, to change the memory layout you need to change the U-Boot environment variables, setting a lower value to the gpu_memory option...
Not at all jrullan, if you'll make some tests please share with us your results. It could be very useful ;) ;)
Hi xwalter, probably this guide is what you need to use the Java RxTxlib: http://www.udoo.org/ProjectsAndTutorials/udoo-serial-libraries-examples/...
baud rate faster than 115200 is possible, for example in this project:...
Freeing init memory: 208K Hi vinay, i don't think this is the right place to post about Android, this topic talking about Ubuntu 14.04. Your log...
Hi Xinran, the CN3 port isn't connected to the Native port of the Arduino processor. The Native port is only connected internally to the iMX6 to...
oh sorry my mistake, i haven't noticed the section. :oops: :oops: In Android you should change the values in the file:...
Hi SoundChaos, You should try to set the correct resolution in the U-Boot video environment variable. Follow the guide to connect the board via...
Hi Blort, Did you tried one of the minimal file system available in Download -> Binaries section: http://www.udoo.org/downloads/#tab2 For...
Obviously the best solution will be a fixed tutorial that works with UDOObuntu (armhf) or a new image with qt5 precompiled (we need to evaluate...
Anytime :D
:D
You are right, connect a resistor to a LED is always better. To choose your resistor value you need to use Ohm Law: V = I * R V = 3.3 Imax = 13...
in the back of the official UDOO lvds 7" panel (a TFT-LCD too) there's a proprietary board that translates the panel's signal to LVDS to works...
I'm not sure cause i didn't tested it but maybe this could help you: https://github.com/sebnil/DueFlashStorage
Separate names with a comma.
