I didn't see the original thread. I'm aware of the following two additional processor related flaws, what is the third? CVE-2017-5753...
I ran the Intel Detection ToolVersion (1.0.0.152) on the UDOO X86 and it reports the "system is not vulnerable" to the Meltdown or Spectre flaws....
@waltervl Thank you for all your effort in putting these together!
@Ryan Lewkowicz - Nice work!
@Ryan Lewkowicz - You need to be careful about Shield compatibility in general with the 101 since it operates at only 3.3v. This discussion may...
To be clear, this limitation is the result of the Arduino (Genuion) microcontroller spec., and not UDOO's implementation of the 101.
Only Arduino boards using an ATmega32u4 microcontroller (Leonardo and Micro), and to some extent the Due and Zero, support a mouse and keyboard....
Looks good! Odd that I didn't have any problem aligning the drive mounting holes with the case using 3mm screws.
The battery just keeps the real-time-clock operating when the main power is off. Without the RTC the OS will mis-date files and potentially have...
I don't see any electrical contact from the mainboard mounting holes to the circuit so metal standoffs should be OK. I already had the longer M3...
If you are asking about a standard 2.5" SATA drive the standard UDOO case + longer standoffs will let you easily change the drive since the screws...
This is how I did it: https://www.udoo.org/forum/threads/a-simple-case-mod-you-may-like-to-use.6924/
Try this link to the same article if your browser supports HTML5: http://iconnect007.uberflip.com/i/817722-smt-may2017/0?m4= This website version...
You can also cut and drill a simple piece of acrylic sheet mounted with spacers. The problem I had was it looked like my little UDOO X86 was...
If you live in North America and are looking for a larger MTS600 M.2 SSD, Amazon has lowered the price to $55 USD for the Transcend 128GB model:...
If you add the fan you will need at least 7 cm.
The UDOO X86 is approximately 45mm tall with its standard heat-sink and the M.2 SSD installed below the main board. You can add approximately...
You need 1 or 2 antennas with Ipex Mhf4 connectors like these:...
More likely going into the more profitable smartphones and PCIe SSD's at this point.
Separate names with a comma.