I will look into disabling it in udev. Could you also expand on "debugging" Where would you start and what to look for as a start point? Anything...
I think these are the guys js0-js2 udooer@udooneo:/sensors$ ls -l total 0 lrwxrwxrwx 1 root root 39 Jul 18 12:14 accelerometer ->...
jas-mx I did updated my rule to KERNEL=="js?", ENV{ID_VENDOR}=="Logitech", ENV{ID_MODEL}=="Logitech_Cordless_RumblePad_2" , NAME="input/js0"...
After removing joystick and rebooting udoo board I see that after adding rule I do not see any jsX in /dev/input/ udooer@udooneo:~$ ls -l...
Below is info for each jsX. I also added /etc/udev/rules.d/73-presistent-joystick.rules KERNEL=="js?", ENV{ID_VENDOR}=="046d",...
I was just informed on IRC SDL channel that SDL2 does not use jsX. It was used in SDL1. Now SDL2 is using udev/evdev. Is there a module that needs...
Ok so I switched to dummy driver and this time I got this. Still wondering why frame buffer was not detected (separate issue)...
So here is configured output building SDL2-2.0.5. Build in progress SDL2 Configure Summary: Building Shared Libraries Building Static Libraries...
Ok I will try to build SDL. Forcing frame buffer did not work udooer@udooneo:~/jstest-sdl$ SDL_VIDEODRIVER=fbcon SDL_FBDEV=/dev/fb0 ./jstest-sdl...
When you say my SDL is configured, I want to adde that it is SDL installed with apt-get. So if anything this is issue with deb package provided....
Ok I build it and when running I get this udooer@udooneo:~/jstest-sdl$ ./jstest-sdl --list Unable to init SDL: Failed to connect to the Mir...
Also noticed by removing joydev module all j0-2 are removed. When doing modprobe -v joydev all three are added back
Thank you for such a swift response :) I get this output from above command if my USB joystick is plugged in to uddo board or now...
Yes I do have it. Here is my full list drwxr-xr-x 2 root root 80 Dec 31 1969 by-id drwxr-xr-x 2 root root 100 Dec 31 1969 by-path...
Ok so I cloned repo and followed instruction listed at https://www.udoo.org/docs-neo/Advanced_Topics/Compile_Linux_Kernel.html I got joydev.ko...
I am using latest minimal image on Neo Full for robotics project and kernel was not build with Joystick support. Support: Would it be possible to...
Does anyone knows if Joystick driver is included. Original Uddo Neo image does not have Joystick enabled
Does anyone know if latest kernel update supports it? Or anyone figured out how to build this module and add manually?
Ok So I have been running CAN for some time on UDOObuntu 2.1.2 Minimal (14.04 LTS) and not I am trying to enable CANFD. Looks like the "ip"...
Same on minimal udooer@udooneo:~$ cat /boot/config-`uname -r` | grep JOYSTICK # CONFIG_INPUT_JOYSTICK is not set
Separate names with a comma.