Thanks waltervl. I was using the curie softserial library and still pinMode must be set to OUTPUT on the transmit pin for it to work. One...
Problem solved. The onboard Arduino 101's transmit pin's pinMode needs to be set to OUTPUT.
I did some further analysis. So to recap... I am sending a char via softserial to an Arduino Teensy 3.2. The Teensy reads the data using its...
Thanks Waltervl. I was hoping you'd reply. Yes, I checked the documentation. I'm communicating on pins 2 and 3 at 4800 baud. No luck, so I was...
Does anyone know if softserial works on the onboard arduino 101?
Thanks ccs_hello and waltervl. Good advice.
Good question. Not enough PWM pins or digital pins among other things. If those weren't issues, would there be any way to debug using...
Thanks. I fear it can't be used as a slave and I don't know how to go about figuring that out from the datasheets online. I was hoping someone...
I'd like to send data from a Python program on the Udoo to a 5V Arduino (probably a Teensy 3.5). The 5V Arduino will be running a dozen or so i2c...
I have Python and C++ programs that interface with the onboard Arduino 101. When the 101 restarts, it often switches between dev/ttyACM0 and...
Thanks for the tip! I actually discovered that one out late last night but couldn't figure out a way to delete a post. Here's what caused the...
I am using Arduino 1.8.2 on Ubuntu 17.04. I used the Boards Manager to install version 2.0.2 for the Intel Curie Boards. When I compile, I get...
Separate names with a comma.