I'm having the same problem, was anyone able to find a workaround?
@waltervl, thank for checking. In my case, I'm not able to see the /dev/ttyACM0 listed. I do see /dev/ttyUSB0 if I connect an external Arduino...
I have the UDOO x86 Ultra (1st gen) with the Intel Aduino 101 on board running Ubuntu 18.04. If run 'ls /dev/tty*', then will the Arduino 101 be...
How did you update the BLE firmware if the UDOO cannot connect or see the onboard Arduino 101 even after pressing the Reset button?...
Yes, I have done all that multiple times (screenshot attached), except for the BLE firmware update. How can I do that?
I know this is an old thread, but it will save my time by using it. I've done everything @MikeSD and @waltervl have indicated here as well as in...
Here is the one for Ubuntu: https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html
http://www.ebay.com/itm/332361111443 https://www.ebay.com/itm/121754915660
I'm not planning to use the Arduino pinout headers so this solution worked best for me. Thanks! [ATTACH] [ATTACH]
I actually need to have the fan running all the time. That was the main reason for me to upgrade to 1.03 since someone posted that result after he...
I did that. In any case, all setting are reset to factory defaults when the UEFI BIOS is updated to a newer version.
Yes, they both are on default settings. Notice that updating the UEFI BIOS to a newer version will restore the factory default configuration....
I have two UDOO X86 boards and today I upgraded their UEFI Firmware from 1.02 to 1.03. Both completed the upgrade successfully and their BIOS...
@ThomasOu, your fan only has two wires so do you leave the FAN_TACHO_IN (Pin 3) disconnected?
I noticed that the heatsink fan spins as soon as you power up the board. However, it stops once Ubuntu boots up and it never turns on again. Not...
Separate names with a comma.
