11x5 keyboard matrix support

Discussion in 'UDOO BOLT' started by ccs_hello, Apr 1, 2019.

  1. ccs_hello

    ccs_hello Active Member

    Joined:
    Apr 15, 2017
    Messages:
    326
    Likes Received:
    125
    In BOLT user manual, there is the 11x5 keyboard scan matrix on the V1000 CPU side.
    I am wondering if there is a built-in keyboard driver support in BOLT's firmware.
    Also interested in knowing if in Windows/Linux/whatever, there is an existing keyboard driver for these 11 (in) + 5 (out) scan matrix pins?
     
  2. ccs_hello

    ccs_hello Active Member

    Joined:
    Apr 15, 2017
    Messages:
    326
    Likes Received:
    125
    Sorry I meant MEC1705 (which is an EC + keyboard controller combo) side of the 11x5 keyboard scan.
    The EC needs the firmware to conduct the keyboard scan job and config registers have to be set correctly.

    Now the question is: does the EC firmware have the proper code in there to support this 11x5 keyboard?
     

Share This Page