Can controller/transceiver

Discussion in 'UDOO X86' started by Daniele, Apr 29, 2017.

  1. Daniele

    Daniele New Member

    Joined:
    Apr 29, 2017
    Messages:
    1
    Likes Received:
    0
    Hello guys, does the UDOO x86 has support for communicating over can bus? Does it has a transceiver or controller for can protocol communication?

    Thank you
    Cheers
    Daniele
     
  2. ccs_hello

    ccs_hello UDOOer

    Joined:
    Apr 15, 2017
    Messages:
    529
    Likes Received:
    193
    Buy "USB CAN Adapter" or "USB CAN Analyzer" from
    Amazon or eBay.
     
  3. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580
    Unlike the Udoo Dual/Quad and Neo the Udoo X86 does not have a Can bus interface. So you have to add one on the Braswell side (USB, bluetooth) or on the Arduino 101 side. If you use a shield check the Intel Arduino 101 compatibility guide.
     

Share This Page