Environmental specs?

Discussion in 'General Discussion' started by Ben Selinger, Aug 27, 2020.

  1. Ben Selinger

    Ben Selinger New Member

    Joined:
    Aug 25, 2020
    Messages:
    1
    Likes Received:
    0
    I haven't noticed any environmental specs published for any of the boards. I saw a blog post describing a single temperature test on the NEO where it survived -35, but nothing else.
    Has anyone done any environmental testing? I've been using the RPI3/4 for our field units for a few years now, and they survive the environment just fine (we've tested the RPI3 to -170C both running, warm booting, and cold booting), but the Pi just doesn't quite have the grunt we need for certain applications so I've been trying to source something else.
    Real world, I need an SBC that'll reliably cold boot at down to around -40. I can add a peltier to facilitate cold booting if necessary, but it's at least gotta survive -40 or so storage.
     
  2. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580
    Go to the seco.com site. There you can buy the commercial versions of the Udoo boards with higher industrial specs.
     
  3. Alejandrin Hessel

    Alejandrin Hessel New Member

    Joined:
    Jan 4, 2022
    Messages:
    1
    Likes Received:
    0
    This document specifies the environmental requirements for Genelec monitoring products. This includes two-way, three-way, and subwoofers. This document applies also to the accessories and supporting products used with monitoring products.
     

Share This Page