HDMI VGA 2av LCD Controller Board Kit For 7" - in combination with a Display

Discussion in 'UDOO QUAD' started by malaga, Aug 2, 2018.

  1. malaga

    malaga New Member

    Joined:
    Jun 19, 2018
    Messages:
    17
    Likes Received:
    0
    hello dear udoo-experts

    i run several single-board-computers such as

    - odroid
    - udoo
    - banana-pi
    - raspberry-pi

    i want to get to run a 7 inch Display AT070TN92 -

    see AT070TN92 LCDs :: i Have seen that i can get this up and running with the Controller-board
    HDMI VGA 2av LCD Controller Board Kit For 7"

    did any body of you have experience of running this above mentioned display with the controller on a Raspberry Pi
    http://www.ebay.de/itm/HDMI-VGA-2AV-Lcd ... SwbqpTtnuj
    datasheet https://www.olimex.com/Products/Retired ... 70TN92.pdf


    do you think that i can run this combination?

    love to hear from you
     
  2. idorel77

    idorel77 Member

    Joined:
    Jul 25, 2014
    Messages:
    131
    Likes Received:
    2
    Hi malaga,
    is working fine that combination.
    Here is that display with controller :
    working on all board with hdmi vga av ...
     
  3. malaga

    malaga New Member

    Joined:
    Jun 19, 2018
    Messages:
    17
    Likes Received:
    0
    hello idorel77 many many thanks for the answer and your shared experience.
    great to hear that.

    BTW; how did you connect the SATA board to the udoo quad - which connector do you use.
    can you give me a hint or a link or a image that helps here.

    thx in advance
     

Share This Page