Help with PIC10F200 on UDOO Quad board

Discussion in 'General Discussion' started by jkorten, Oct 16, 2015.

  1. jkorten

    jkorten New Member

    Joined:
    Aug 19, 2015
    Messages:
    7
    Likes Received:
    1
    Hello - having skipped the sometimes very important step of looking at the schematics. I accidentally shorted J22 (connected to the "erase" pin of U114 the PIC10F200 microprocessor) on the Quad board.

    So I suppose I've erased it when it was power cycled.

    Is there any document that shows what this chip on the Quad board is used for? Any chance I can reprogram this? Or have I bricked my board?

    I am unable to locate any document that describes the function of this chip.

    Thanks for any guidance in advance.

    Jerry
     
    jkorten, Oct 16, 2015
    #1
  2. sirrab

    sirrab UDOOer

    Joined:
    Jul 26, 2014
    Messages:
    264
    Likes Received:
    32
    Here is the google searched data sheet.....

    http://ww1.microchip.com/downloads/en/DeviceDoc/40001239F.pdf

    The UDOO gurus will have to help with re-programming.
     
    sirrab, Oct 17, 2015
    #2
  3. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    Where is PIC10F200 on UDOO board? Where have you found it?
     
    Andrea Rovai, Oct 26, 2015
    #3

Share This Page