Perhaps this is not the best board to post this, but maybe someone can help. I have recently received the UDOO x86 and I am in need of some tech support. I have created a USB Ubuntu install drive and went through the process of installing Ubuntu 16.04 on a micro SD card and all seems fine. I have followed the instructions to remove the USB drive and press enter and it restarted Ubuntu 16.04. It seems to have been installed! However, I powered down eventually and restarted the UDOO x86 and I get "No bootable device -- insert boot disk and press any key" error. I have tried running it in EFI and Legacy, with no luck. I have also tinkered around with a few other boot options in the BIOS - but nothing excessive. When booting in dual boot and EFI - I do get a Shell option which lists the Device mapping table above it. I have tried this with Ubuntu 16.10 with no luck and it should be noted that I don't have an EMMC storage option, so the Micro SD should be the only storage option - aside from the USB boot drive but it's only 2GB in size. Am I missing a step in install or perhaps after? Any ideas would be appreciated! Thanks!