Problem with Arduino IDE

Discussion in 'Troubleshooting' started by igorvuk, Feb 17, 2015.

  1. igorvuk

    igorvuk New Member

    Joined:
    Feb 17, 2015
    Messages:
    4
    Likes Received:
    0
    I have trouble to program SAM
    Jumper is removed, no SD card, serial driver installed, tried with patch and without

    Error what i continuously get is "no Device on xx"

    I tried with:

    OSX - Arduino IDE 1.5.4
    OSX - Arduino IDE 1.5.8
    OSX - Arduino IDE 1.6.0

    Win - Arduino IDE 1.5.4-r2
    Win - Arduino IDE 1.5.8
    Win - Arduino IDE 1.6.0

    Im stuck.. please some ideas..
     
  2. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    Hi there igorvuk,
    you have to have an SD inside with the system booted, also if you program from an external PC.
     
  3. igorvuk

    igorvuk New Member

    Joined:
    Feb 17, 2015
    Messages:
    4
    Likes Received:
    0
    Tnx, it's work now
     
  4. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    Fine then!
     

Share This Page