ubuntu 1.3 doesn't boot

Discussion in 'Troubleshooting' started by unsigned, Nov 13, 2013.

  1. unsigned

    unsigned New Member

    Joined:
    Oct 27, 2013
    Messages:
    10
    Likes Received:
    0
    Hi,
    I've some problem booting with arduino quad...
    The boot with ubuntu 1.2 was successful, then I turned off my udoo, prepared the usb like this:
    - unmounted
    - removed all the partition there was before
    - created a new partition in fat32 (all this from gparted)
    - unmounted
    - dd from the img file to the mmcblk0 (wich I've found earlier with df)
    - checked out and the microsd was named correctly (at least the 6.7gb partition)

    I've tried for 2 days (after several remake of the microsd) to boot up but I don't have either serial or hdmi output (tried both minicom and putty)...

    My light is green stable and I'm alimenting it at 12V2A.

    I've done something wrong?
    I've lost the img for ubuntu 1.2, can you please give me the link if you have it?

    Thanks and sorry XD
     
  2. Xykon

    Xykon Member

    Joined:
    Nov 1, 2013
    Messages:
    64
    Likes Received:
    20
  3. unsigned

    unsigned New Member

    Joined:
    Oct 27, 2013
    Messages:
    10
    Likes Received:
    0
  4. delba

    delba Administrator Staff Member

    Joined:
    May 8, 2013
    Messages:
    1,063
    Likes Received:
    9
  5. unsigned

    unsigned New Member

    Joined:
    Oct 27, 2013
    Messages:
    10
    Likes Received:
    0
  6. delba

    delba Administrator Staff Member

    Joined:
    May 8, 2013
    Messages:
    1,063
    Likes Received:
    9

    let us know if that solves the problem.
     

Share This Page