Upgrade current system to use UDOO x86

Discussion in 'General Discussion' started by Gundy81, Oct 14, 2017.

  1. Gundy81

    Gundy81 New Member

    Joined:
    Oct 14, 2017
    Messages:
    1
    Likes Received:
    0
    I'm trying to use video in and touch from an old device. Is there a way to hook the UDOO x86 to this system. The video out connection looks similar to the one on the pie 3. Clever advertising sold me on the product but the x86 should make it run properly.

    Thanks!
     
    Last edited by a moderator: Oct 16, 2017
  2. Laura

    Laura Administrator

    Joined:
    Apr 22, 2016
    Messages:
    374
    Likes Received:
    155
    The UDOO X86 has three display outputs. 1x HDMI and 2x MiniDP++.
    For touch capability, you will need to use a panel that provides this through a USB connection, or I2C (this one is not simple, as even though the board has a I2C touch interface on the GPIO, you will need drivers from the manufacturer, which are rarely available).

    We have a hybrid HDMI/USB touch panel in our shop: https://shop.udoo.org/7inch-hdmi-usb-display-touch.html
     

Share This Page