UDOO X86 II Documentation is online

Discussion in 'UDOO X86' started by evaloverde, Jun 10, 2019.

  1. evaloverde

    evaloverde Administrator Staff Member

    Joined:
    Apr 29, 2019
    Messages:
    233
    Likes Received:
    59
    Good morning UDOOers,
    the documentation for the brand new X86 II is online! You can find it here.

    If you don't know what the X86 II is you can find out more here.

    Have a fantastic day, and keep being awesome!
     
    Last edited: Jun 11, 2019
    waltervl and ektor5 like this.
  2. waltervl

    waltervl UDOOer

    Joined:
    Dec 12, 2015
    Messages:
    2,314
    Likes Received:
    580
    Good initiative!
    What is the easiest way to identify if someone has an Udoo X86 or X86 II?
    Can you see it from the outside? Is there a Linux command that will show it ?
     
  3. evaloverde

    evaloverde Administrator Staff Member

    Joined:
    Apr 29, 2019
    Messages:
    233
    Likes Received:
    59
    Hi, the difference in aesthetics is minor. The only two major visible differences are:
    - On the bulkier side, where all the connectors are the microcontroller is smaller (Curie is bigger than Leonardo).
    - On the flip side under our logo, the CE and FC logo you can find some writing. If it ends in REVI it means that you're holding an X86 II, if it ends in any other letter that in the alphabet comes before I it's an UDOO X86.

    There's also a Linux command you can use.
    - Type lsusb
    - On the X86 I, among other devices, you'll see
    Bus 001 Device 011: ID 8087:0ab6 Intel Corp.
    - On the X86 II, you'll find
    Bus 001 Device 009: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID)
     
    waltervl likes this.
  4. Quack

    Quack UDOOer

    Joined:
    Jun 27, 2020
    Messages:
    15
    Likes Received:
    4
    would it be appropriate to cross post my Braswell GPIO correction thread to this thread?
     
  5. Quack

    Quack UDOOer

    Joined:
    Jun 27, 2020
    Messages:
    15
    Likes Received:
    4
  6. Quack

    Quack UDOOer

    Joined:
    Jun 27, 2020
    Messages:
    15
    Likes Received:
    4
  7. evaloverde

    evaloverde Administrator Staff Member

    Joined:
    Apr 29, 2019
    Messages:
    233
    Likes Received:
    59
    Hey there sorry for the late reply. At the moment, I cannot be sure, but when the update happens, we will tell you guys all about it
     
  8. qqaysaneah

    qqaysaneah New Member

    Joined:
    Jul 2, 2019
    Messages:
    1
    Likes Received:
    0
    Hello
    I am looking for TPM 2.0 driver for UDOO X86 II, for Microsoft Windows 10.
    I hope that you could direct me to where I can obtain a copy windows 10 drivers for this board.
    which TPM chip that UDOO X86 II board use?

    thank you
    hope to hear from you soon.
     

Share This Page