If you want to install a webserver, in order to avoid port conflicts, you need to change the port used by the Web Control Panel.

Using the Web Control Panel

You can change the port using the GUI provided by the Web Control Panel itself, in Configuration/Advanced settings.

Reboot your board to apply the settings.

Using the terminal/SSH

To change the default port, run in a terminal:

 echo 8080 | sudo tee /etc/udoo-web-conf/port

If you want to disable the tool completely, run

 echo manual | sudo tee /etc/init/udoo-web-conf.override

Enable it again removing the override file:

 sudo rm /etc/init/udoo-web-conf.override
 
This page was last updated on Saturday, March 11, 2017 at 7:11 PM.